← All stories
● Covered by 1 source · 3 reportsLow impact3 neutral

Modder Adapts 4-kW Air Conditioner Radiator for PC Cooling Benchmarks

🔄 Updated 10d ago — new reporting from Tom's Hardware
New to BrevFeed? We gather this story from every outlet covering it into one summary — ranked by real-world impact, not just the latest headline — so you never miss what matters. What is BrevFeed? →

Key points

  • A 4-kW AC radiator was converted for PC water cooling.
  • RTX 5060 temperature dropped from 52ºC to 33ºC.
  • RTX 3080 temperature dropped from 65ºC to 28ºC.
  • Overclocking GPUs showed only a 3% FPS increase.
  • A Reddit user named u/Motor_Attention1865 created the external cooling system.
  • An Arduino Mega controls the external cooling system.
  • The system uses a three-way valve to route coolant outside.
  • The modder's room has heated floors.
  • The PC was dumping too much heat under the table.
  • The external radiator operates in 25 °F (-4 °C) weather.
  • The system cools a delidded Core Ultra 7 270K Plus CPU.
  • The CPU uses a Thermal Grizzly 1851 Mycro Pro direct-die water block.
  • The CPU uses Thermal Grizzly Conductonaut Extreme liquid compound.
  • An RTX 4070 Ti Super is watercooled with a Bykski water block.
  • The system includes 2x24GB DDR5-8400 G.Skill RAM.

Custom Cooling System Assembly

A hardware examiner, TrashBench, modified a 4-kW outdoor radiator-fan unit from a split air-conditioning system for PC cooling. The process involved removing unnecessary internal components, adding casters for mobility, and integrating a standard reservoir into the unit. Custom 3D-printed mounting brackets were designed for the cold plates to connect to PC components.

RTX 5060 Cooling Performance

The modified cooling system was first tested with an RTX 5060 GPU. Its temperature dropped from 52ºC with a standard cooler to 33ºC, a 16ºC reduction. Despite this significant temperature drop, overclocking the GPU from 2902 MHz to 3300 MHz (a 14% clock speed increase) resulted in only a 3% average FPS uplift. This suggests that Nvidia's power/performance curve is well-optimized since the RTX 2000 series.

RTX 3080 and CPU Cooling Results

Next, an RTX 3080, a more power-hungry GPU, was tested. Its temperature decreased from 65ºC to 28ºC. Similar to the RTX 5060, overclocking the RTX 3080 also yielded only a 3% FPS improvement. The system was then challenged with a combined GPU and CPU load, using an Intel Core i9 14900K processor, known for its high heat output.

Implications for Overclocking

The experiment demonstrated the extreme cooling capabilities of a repurposed 4-kW air conditioner radiator. While it achieved very low operating temperatures for both GPUs, the minimal performance gains from overclocking indicate that modern GPUs are already operating near their optimal power-to-performance efficiency. This suggests that simply lowering temperatures beyond a certain point may not translate to substantial real-world gaming performance improvements.

Updates

🕒 2026-11-11 · new reporting from Tom's Hardware
  • A Reddit user named u/Motor_Attention1865 created the external cooling system.
  • An Arduino Mega controls the external cooling system.
  • The system uses a three-way valve to route coolant outside.
  • The modder's room has heated floors.
  • The PC was dumping too much heat under the table.
  • The external radiator operates in 25 °F (-4 °C) weather.
  • The system cools a delidded Core Ultra 7 270K Plus CPU.
  • The CPU uses a Thermal Grizzly 1851 Mycro Pro direct-die water block.
  • The CPU uses Thermal Grizzly Conductonaut Extreme liquid compound.
  • An RTX 4070 Ti Super is watercooled with a Bykski water block.
  • The system includes 2x24GB DDR5-8400 G.Skill RAM.

✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →

The daily brief

One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.

One email a day. Unsubscribe in one click, any time.

Today's brief

Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.

~4 min · 3 stories · Nov 21

▶ Play today's brief Listen on Spotify

New every morning, and the back catalogue is archived by date.

How outlets covered it

PC modder Trash Bench used a bounce house inflator blower to cool a gaming laptop, reducing GPU temperatures from 84 degrees Celsius to 48.8 degrees Celsius. This experimental setup improved Cyberpunk frame rates from 47 FPS to 56 FPS, demonstrating the impact of extreme airflow on laptop thermal management.

A Reddit user modified their PC's water cooling system to route heat outdoors using an external radiator and an Arduino Mega. This setup prevents the PC from heating the room during winter and avoids condensation by maintaining coolant temperature above the dew point.

A hardware modder repurposed a 4-kW outdoor air conditioner radiator unit into a PC water-cooling system to test its performance with an RTX 5060, RTX 3080, and Intel Core i9 14900K. The custom setup significantly reduced GPU temperatures, but overclocking yielded minimal FPS gains, demonstrating current GPU power/performance curves.