← All stories
● Covered by 2 sources · 2 reportsLow impact2 neutral

Seagate Introduces FireCuda Forge External Hybrid Drive, Requires User-Supplied NVMe SSD

🔄 Updated 10d ago — new reporting from Ars Technica
New to BrevFeed? We gather this story from every outlet covering it into one summary — ranked by real-world impact, not just the latest headline — so you never miss what matters. What is BrevFeed? →

Key points

  • FireCuda Forge is an external 8TB or 20TB hybrid hard drive.
  • Requires user to install an M.2 2280 NVMe SSD.
  • Uses "Alkemi" technology for data prioritization and caching.
  • Supports PCIe Gen3 SSDs; faster SSDs will not improve performance.
  • FireCuda Forge costs $699 for 8TB, $899 for 20TB.
  • Maximum supported NVMe capacity is 1TB.
  • NVMe requires minimum 2,400MB/s read and 2,000MB/s write speeds.
  • Combined system claims 2,500MB/s read and 2,000MB/s write speeds.
  • Supports USB4, Windows 11, and macOS 26+.

New Hybrid Storage Solution

Seagate has released the FireCuda Forge, an external hard drive offered in 8TB and 20TB capacities. This new product revives the concept of hybrid storage by integrating a user-supplied NVMe SSD with a traditional hard drive. The design addresses the current high cost of solid-state drives by allowing users to provide their own M.2 2280 SSD.

User Installation and Compatibility

The FireCuda Forge requires users to partially disassemble the enclosure and install their own M.2 2280 SSD for the device to function. Seagate recommends 1TB drives with DRAM. While the drive supports PCIe Gen3 performance, installing faster PCIe Gen4 SSDs will not yield performance improvements. The device has a mounting point only for 2280-length drives, and using SSDs smaller than 1TB may reduce performance due to less space for frequently used files.

Seagate has a limited list of officially qualified SSDs, including Samsung 990 Pro, WD/Sandisk SN850X/GX Pro 850X, and WD/SanDisk SN710/GX7100.

Alkemi Technology for Data Management

Seagate's "Alkemi" product architecture manages the unification and data handling between the spinning platter drive and the SSD. This technology combines onboard processing with the hard drive and the user-supplied SSD to prioritize active data. Alkemi observes workloads, adapts to user behavior over time, and dynamically caches and prioritizes frequently used data without requiring manual user intervention.

Initial Setup and Future Upgrades

Upon SSD installation and connection, the FireCuda Forge appears as a single drive in operating systems like Windows 11 and macOS 26 and later, without requiring additional software setup. Seagate states that users can remove and upgrade the installed SSD to a larger capacity later.

Updates

🕒 2026-11-11 · new reporting from Ars Technica
  • FireCuda Forge costs $699 for 8TB, $899 for 20TB.
  • Maximum supported NVMe capacity is 1TB.
  • NVMe requires minimum 2,400MB/s read and 2,000MB/s write speeds.
  • Combined system claims 2,500MB/s read and 2,000MB/s write speeds.
  • Supports USB4, Windows 11, and macOS 26+.

✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →

The daily brief

One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.

One email a day. Unsubscribe in one click, any time.

Today's brief

Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.

~4 min · 3 stories · Nov 21

▶ Play today's brief Listen on Spotify

New every morning, and the back catalogue is archived by date.

How outlets covered it

Seagate introduced the FireCuda Forge line of hybrid storage drives, combining HDD capacity with user-supplied M.2 NVMe SSDs for speed. These drives are managed by the new Alkemi intelligent storage platform and are available in 8TB and 20TB HDD configurations.

Seagate has launched the FireCuda Forge, an external hybrid hard drive available in 8TB and 20TB capacities, which requires users to install their own M.2 2280 NVMe SSD. The drive uses "Alkemi" technology to combine the hard drive and user-supplied SSD, prioritizing frequently accessed data without manual management. This product aims to offer a hybrid storage solution, similar to earlier designs, in response to current high SSD prices.