← All stories
● Covered by 1 source · 1 reportLow impact1 neutral

Hobbyist Converts $45 USB-C Hub into Nintendo Switch 2 Dock via Firmware Patch

🔄 Updated 9d ago
New to BrevFeed? We gather this story from every outlet covering it into one summary — ranked by real-world impact, not just the latest headline — so you never miss what matters. What is BrevFeed? →

Key points

  • Hobbyist mkopec modified a Cable Matters USB-C hub.
  • Firmware patch of 540 bytes enables official dock functionality.
  • Mod allows TV mode and fixes washed-out HDR over HDMI.
  • The modified hub retains normal PC and phone functionality.

Firmware Modification for Dock Functionality

A hobbyist, mkopec, successfully converted a standard $45 Cable Matters USB-C hub into a functional Nintendo Switch 2 dock. This was achieved by modifying the hub's firmware with approximately 540 bytes of code. The altered firmware allows the hub to respond to Nintendo's vendor messages and present the same identity as an official dock, which enables TV mode functionality not present with the stock firmware.

Addressing HDR Output

In addition to enabling TV mode, the firmware modification also included a separate fix that corrects washed-out HDR over HDMI. This provides an improved visual experience when using the modified hub with the Nintendo Switch 2.

Motivation and Compatibility

The modder undertook this project to create a more portable travel dock, citing the bulkiness of Nintendo's official dock. The modification did not negatively affect the hub's original functionality; it continues to work normally with PCs and phones, indicating no noticeable trade-offs for the added capabilities.

Technical Details of the Mod

The stock hub could charge the console and negotiate power and DisplayPort Alt Mode but failed to display video. By sniffing USB Power Delivery (USB-PD) traffic from an official Switch 2 dock, mkopec discovered that the official dock advertises both a DisplayPort ID and a Nintendo-specific mode ID. The console first enters Nintendo's mode, then DisplayPort, and subsequently sends proprietary vendor messages once DisplayPort is configured.

The modification involved dumping the firmware of the VL103 USB-PD controller chip, making the necessary changes, and then flashing the updated firmware back to the chip. The hub uses several specialized chips, including a VL103 for USB-PD, a VL817 for USB hub functions, and an RTD2142 for DisplayPort-to-HDMI conversion. The key change involved altering the VIA Labs vendor ID reported by the VL chips to match the official dock's identity.

✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →

The daily brief

One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.

One email a day. Unsubscribe in one click, any time.

Today's brief

Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.

~4 min · 3 stories · Nov 21

▶ Play today's brief Listen on Spotify

New every morning, and the back catalogue is archived by date.

Reporting from

A hobbyist modified a $45 USB-C hub's firmware with 540 bytes of code to enable it to function as a Nintendo Switch 2 dock. The modification allows the hub to mimic an official dock's identity and proprietary message exchange, enabling TV mode and correcting HDR output.