← All stories
● Covered by 1 source · 1 reportMedium impact1 neutral

Techie Uses Voltage Glitching to Convert Nvidia CMP-170HX into A100-Equivalent GPU

🔄 Updated 9d ago
New to BrevFeed? We gather this story from every outlet covering it into one summary — ranked by real-world impact, not just the latest headline — so you never miss what matters. What is BrevFeed? →

Key points

  • Nvidia CMP-170HX GPU converted to A100-equivalent.
  • Voltage glitching exploited GA100 eFuse controller.
  • Unlocked disabled HBM2e VRAM and features.
  • Custom circuit board with STM32G4 microcontroller used.
  • Original card cost $2,500, A100 80GB costs $20,000.

Voltage Glitching Unlocks GPU Potential

A tech enthusiast, known as Kate, has successfully modified an Nvidia CMP-170HX cryptomining GPU to achieve performance levels similar to an 80GB Nvidia A100 GPU. This was accomplished through a technique called voltage glitching, which targeted the card's onboard fuse controller. The CMP-170HX, typically priced around $2,500, was transformed into a device comparable to a $20,000 A100.

Exploiting GA100 Silicon Limitations

The modification leveraged the fact that the GA100 silicon, used in both the CMP-170HX and A100, contains all corresponding HBM2e VRAM dies and other features. These components are typically disabled at the factory to create lower-end models. Kate's work built upon previous efforts like CMPunlocker, which provided soft-mod capabilities for CMP-170HX cards, but went further by directly manipulating the hardware fuses.

The eFuse Controller Vulnerability

Nvidia's GA100 cards feature an elaborate eFuse controller, an array of 16,384 fuses that determine the card's configuration, including VRAM sections, shader modules, and PCIe/NVLink capabilities. While these fuses are normally read-only for users, Kate discovered that Nvidia's design allowed for manipulation. By 'popping' or writing to these fuses, it was possible to grant access to features that were previously disabled.

Custom Hardware for Voltage Manipulation

To execute the voltage glitching, Kate designed a simple circuit board using an $8 STM32G4 microcontroller. This board was connected to the power signals on the GPU's PCB. It intercepted the PWM signals sent to the voltage regulators (VRMs), forcing them to produce voltage glitches on the line feeding the GPU's fuse controller. This precise manipulation allowed for the re-enablement of disabled hardware features.

✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →

The daily brief

One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.

One email a day. Unsubscribe in one click, any time.

Today's brief

Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.

~4 min · 3 stories · Nov 21

▶ Play today's brief Listen on Spotify

New every morning, and the back catalogue is archived by date.

Reporting from

A tech enthusiast successfully converted an Nvidia CMP-170HX cryptomining GPU into a card with performance comparable to an 80GB A100 GPU through voltage glitching. This modification unlocked disabled VRAM and features on the GA100 silicon, originally present but factory-disabled for lower-tier models. The process involved exploiting the card's eFuse controller using a custom circuit board and an STM32G4 microcontroller.