← All stories
● Covered by 1 source · 1 reportMedium impact1 neutral

JEDEC Previews DDR6 RAM Specification: 44% Shorter Modules, 4X DDR5 Baseline Bandwidth

🔄 Updated 2d ago
New to BrevFeed? We gather this story from every outlet covering it into one summary — ranked by real-world impact, not just the latest headline — so you never miss what matters. What is BrevFeed? →

Key points

  • DDR6 modules are 74mm long, 44% shorter than DDR5 (133mm).
  • Baseline transfer rate is 12.8 GT/s, over double DDR5's baseline.
  • Module bandwidth reaches 153.6 GB/s, a 4X increase over DDR5 baseline.
  • Data bus width is 96 bits with four 24-bit sub-channels.

DDR6 Physical and Performance Advancements

JEDEC has released a preview of the DDR6 specification, indicating significant changes in both physical dimensions and performance. DDR6 memory modules will be 74mm in length, representing a 44% reduction compared to DDR5's 133mm modules. This makes DDR6 modules only 6% longer than current DDR5 SO-DIMM modules.

From a performance standpoint, DDR6 will debut with a transfer rate of 12.8 GT/s, which is more than double the baseline transfer rate of DDR5. This, combined with a new design, quadruples the memory bandwidth per module compared to DDR5's baseline.

Architectural Changes and Bandwidth Uplift

DDR6 introduces a 96-bit data bus width, a 50% increase over DDR5's 64 bits. The channel architecture is also redesigned, moving from DDR4 and DDR5's single 64-bit channel and two 32-bit sub-channels to a new design featuring four 24-bit sub-channels.

These architectural changes result in a substantial bandwidth increase. DDR6 offers up to 153.6 GB/s of total module bandwidth at its baseline, a four-fold increase compared to DDR5's baseline of 38.4 GB/s. When comparing high-end DDR5-9200 RDIMMs (73.6 GB/s) to DDR6-12800 RDIMMs, the bandwidth uplift is more than double.

Pin Count and Form Factor Considerations

While DDR4 and DDR5 maintained a 288-pin count, the significant reduction in DDR6 module length and increased data bus width suggest a new pinout and density. JEDEC has not yet disclosed the specific pin count for DDR6.

Early speculation suggested DDR6 might be limited to CAMM form factors. However, JEDEC's preview does not exclude other form factors. The organization is still evaluating potential options, which may include RDIMM, UDIMM, and CAMM formats, similar to DDR5.

Server-Side Performance and Future Speeds

For server applications, DDR6 RDIMMs are expected to start at DDR6-12800, surpassing the DDR5 RDIMM maximum of DDR5-9200. JEDEC anticipates that DDR6 will eventually reach speeds of DDR6-14400 and beyond.

✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →

The daily brief

One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.

One email a day. Unsubscribe in one click, any time.

Today's brief

Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.

~4 min · 3 stories · Nov 21

▶ Play today's brief Listen on Spotify

New every morning, and the back catalogue is archived by date.

Reporting from

JEDEC released a preview of the DDR6 memory specification, detailing modules that are 44% shorter than DDR5 and offer a baseline transfer rate of 12.8 GT/s, more than double DDR5's baseline. The new design quadruples memory bandwidth per module compared to DDR5's baseline, achieving up to 153.6 GB/s, and introduces a 96-bit data bus width with four 24-bit sub-channels.