Flipper One is an open Linux computer built around a powerful ARM processor. It includes integrated Wi-Fi 6E and Gigabit Ethernet, positioning it as a network multi-tool. The device supports expansion via M.2 modules for functionalities like 5G cellular modems and SDR radio.
The Flipper One operates on open-source Linux firmware, utilizing a mainline kernel. This design aims for compatibility with current kernel versions, avoiding vendor-specific BSP limitations and binary blobs. Collabora is assisting in bringing the Rockchip RK3576 SoC into the mainline kernel to ensure full upstream support.
The platform is designed to be fully upstream-supported and well-documented, providing customization options for the community.
Flipper One employs a co-processor architecture with two independent processors. A low-power MCU (Raspberry Pi RP2350) manages core device controls, including the LCD, buttons, LEDs, power, and Linux OS boot parameters. A high-performance CPU (Rockchip RK3576) runs the Linux operating system, handling user applications, networking interfaces (Wi-Fi, Ethernet), and high-speed peripherals like USB3 and PCIe. The CPU also integrates an NPU for AI acceleration and a GPU for graphics output via HDMI and DisplayPort.
The device supports SSH access and charging via a single USB cable. It can emulate a virtual network adapter, a serial adapter, and a mass-storage device simultaneously. This functionality does not require drivers on macOS, Linux, Windows, iOS, or Android.
✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →
One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.
One email a day. Unsubscribe in one click, any time.
Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.
▶ Play today's briefNew every morning, and the back catalogue is archived by date.
Flipper One, an open Linux computer featuring an ARM processor, Wi-Fi 6E, and Gigabit Ethernet, is preparing for a Kickstarter campaign and opening pre-orders. The device uses a co-processor architecture with a low-power MCU and a high-performance CPU, running an open-source Linux firmware with mainline kernel support.