← All stories
● Covered by 1 source · 1 reportLow impact1 neutral

Hacker Runs Doom on USB Flash Drive's Built-in LCD, Controlled by File Operations

🔄 Updated 5d ago
New to BrevFeed? We gather this story from every outlet covering it into one summary — ranked by real-world impact, not just the latest headline — so you never miss what matters. What is BrevFeed? →

Key points

  • Doom runs on a MOVESPEED MSSU10 USB flash drive's LCD.
  • Game control is implemented by copying files to/from the drive.
  • Hacker extracted and reverse-engineered the display's firmware.
  • The drive uses a Silicon Motion SM2320G controller and a CCM4101 microcontroller.

Doom on a USB Drive Display

Hardware hacker Aaron Christophel demonstrated running the classic game Doom on the built-in LCD of a MOVESPEED MSSU10 USB flash drive. The display, typically used for status information like transfer speed and capacity, was repurposed to render the game.

The method of control for the game is unconventional: players interact with Doom by copying files to and from the USB drive. This approach circumvents the lack of physical input buttons on the drive itself, utilizing the drive's primary storage controller activity.

Reverse Engineering the Hardware

Christophel's process involved a teardown of the MOVESPEED MSSU10 drive, a 128GB model. Despite the display chip's markings being removed, he used an open debug port to extract its firmware. This firmware extraction, aided by AI for reverse-engineering, allowed him to identify the components and understand their operation.

The drive features a Silicon Motion SM2320G main flash controller and a separate C*Core CCM4101 microcontroller dedicated to the 428 x 142 color LCD. The CCM4101 has 2MB of flash and a small amount of RAM. The NAND components are from SanDisk.

Technical Challenges and Solutions

A key challenge was the absence of direct input methods for the game on the drive. The display chip lacks its own USB connection and only monitors the storage controller's activity. Christophel leveraged the storage controller's read and write counters, polling them via I2C every 50 milliseconds, to translate file operations into game commands. This method was noted as simpler than previous attempts involving single physical buttons.

During the reverse-engineering, Christophel noted discrepancies, such as the CCM4101 microcontroller's measured operating clock frequency of 40.2 MHz, despite documentation and stock firmware indicating 200 MHz. The chip, marketed for security applications like fingerprint readers, did not have these features enabled in the drive.

✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →

The daily brief

One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.

One email a day. Unsubscribe in one click, any time.

Today's brief

Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.

~4 min · 3 stories · Nov 21

▶ Play today's brief Listen on Spotify

New every morning, and the back catalogue is archived by date.

Reporting from

Hardware hacker Aaron Christophel successfully ran the game Doom on the integrated LCD of a MOVESPEED MSSU10 USB flash drive. He achieved this by reverse-engineering the display's firmware and programming the game to be controlled by copying files to and from the drive. This demonstrates an unconventional use of a common portable storage device's display component.