A weak Wi-Fi signal is often due to poor router placement. Routers broadcast signals in all directions, and signal strength diminishes with distance. Placing a router in a corner can direct much of its signal outside the intended coverage area. Electronic devices can also degrade signal quality if placed too close to the router.
The best location for a Wi-Fi router depends on the building layout and desired coverage. Generally, a central and elevated spot in the home, away from interference sources, allows for even signal distribution. This could be on a side table, desk, or top of a cabinet. Keeping the router in the open, away from corners, prevents signal blockage and wasteful broadcasting.
For multi-story homes, position the router closer to the ceiling if on the ground floor, or closer to the floor if on the second level. Antenna positioning also affects signal. For single floors or apartments, vertical antenna placement is most effective. In buildings with multiple floors, angle at least one antenna to about 30 degrees while keeping others vertical.
To maximize router performance, minimize interference by keeping it away from metal objects, thick walls (especially metal and concrete), Bluetooth devices, and microwaves, which interfere with the 2.4GHz band. Before finalizing a position, run speed tests. Conduct an initial test to establish a baseline, then perform additional tests while adjusting the router's position to evaluate the impact on signal quality and internet speed.
✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →
One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.
One email a day. Unsubscribe in one click, any time.
Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.
▶ Play today's briefNew every morning, and the back catalogue is archived by date.
Wi-Fi signal strength is significantly affected by router placement, with common issues stemming from improper positioning rather than hardware failure. Optimal placement involves central, elevated locations, away from signal-blocking objects and interfering electronics. Adjusting antenna orientation and conducting speed tests are also recommended to achieve the best coverage.