← All stories
● Covered by 1 source · 1 reportLow impact1 neutral

Hardware Hacker Creates Open-Source Portable Wi-Fi NAS for 3.5-inch Floppy Disks

🔄 Updated 9h ago
New to BrevFeed? We gather this story from every outlet covering it into one summary — ranked by real-world impact, not just the latest headline — so you never miss what matters. What is BrevFeed? →

Key points

  • floppy3.5 is an open-source portable Wi-Fi NAS for 3.5-inch floppies.
  • It uses an RP2354A microcontroller, ESP32-S3 bridge, and Greaseweazle protocol.
  • Features an LCD, buttons for read/save, microSD slot, and web interface.
  • Allows direct disk imaging and data manipulation via USB connection.

Introduction to floppy3.5

Hardware hacker BigCrimping, known as Crimp, has released floppy3.5, an open-source portable Wi-Fi Network Attached Storage (NAS) device. This device is specifically designed to facilitate the reading and copying of 3.5-inch floppy disks across a network. The project addresses the need for accessing data from vintage hardware, such as early digital cameras like the Sony Mavica and Panasonic PV-SD series, which utilized standard 3.5-inch floppies.

Open-Source Design and Components

The design for floppy3.5 is entirely open-source, with all necessary files, including 3D printable enclosure data and custom PCB layouts, available on GitHub. The device incorporates an RP2354A microcontroller and an ESP32-S3 bridge. Additional components required for assembly include a battery, a slimline floppy drive, a Wi-Fi module, and a microSD card slot.

User Interface and Functionality

floppy3.5 features an onboard monochrome LCD that displays information such as sector and cylinder counts, a good/bad sector map, file counts, and firmware update progress. Physical buttons on the device allow users to initiate disk scans (READ), save files to an SD card (SAVE), return to the home screen (DISP), and power the device on or off (POWER).

Files can be optionally stored on a microSD card, enabling offline archival of multiple floppies. For content management, users can access a web interface over Wi-Fi. A USB connection provides advanced features, including the ability to fetch entire disk images.

Greaseweazle Protocol Integration

Crimp opted to use the Greaseweazle floppy drive communication protocol instead of a traditional floppy drive controller. This choice reduces hardware complexity and provides direct control over the drive's wire signals, allowing for flexible imaging and data manipulation regardless of the disk's format. While floppy3.5 natively supports FAT12, the Greaseweazle utilities can be used via a USB connection for other formats.

✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →

The daily brief

One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.

One email a day. Unsubscribe in one click, any time.

Today's brief

Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.

~4 min · 3 stories · Nov 21

▶ Play today's brief Listen on Spotify

New every morning, and the back catalogue is archived by date.

Reporting from

A hardware hacker named BigCrimping developed floppy3.5, an open-source portable Wi-Fi NAS designed to read and copy 3.5-inch floppy disks over a network. This device allows users to archive data from old floppies, including those used by vintage digital cameras, without needing a direct computer connection.