Researchers at the University of Rochester have successfully transformed a standard Ender 3 FDM 3D printer into a 3D bioprinter. This modification, detailed in ACS Applied Polymer Materials, brings the total cost of the bioprinter to around $450, a substantial reduction from the typical $100,000+ price tag of commercial bioprinters. This cost-effective solution aims to broaden access to engineered living material (ELM) research.
The conversion involved replacing the original print head with a custom-designed syringe pump. This pump, constructed with 3D-printed PETG components, accommodates a 10 mL glass Luer-lock syringe and features a plunger mechanism for precise extrusion and retraction control. The overall workflow mirrors traditional 3D printing: models are designed in SolidWorks, exported as STL files, and sliced in Slic3r. Print settings were adjusted for a 0.254mm needle, with an extrusion multiplier of 0.004, yielding a flow rate of 2 mL/h at 23 mm/s print speed.
Instead of plastic filament, the bioprinter uses a bio-ink composed of bacteria and alginate. This bio-ink is printed within two types of support materials: agarose or gelatin gels. Agarose is used for long-term incubation, allowing ELMs to remain viable for over four weeks, while gelatin is used for prints intended for extraction. Both support slurries are enriched with calcium ions, which induce cross-linking in the alginate strands, forming a solid structure that encapsulates the living bacteria.
This open-source, affordable bioprinter addresses significant barriers in synthetic biology and ELM research, specifically the high cost of hardware and the difficulty in maintaining structural integrity during printing. By providing a low-cost platform, the researchers aim to accelerate the exploration of bacteria-generated biomaterials. These materials have potential applications in areas such as antimicrobial treatments, plastic degradation, and wastewater treatment.
✨ This summary was generated by AI from the outlets' reporting listed below. It is not independently verified and may contain errors — check the original sources. How BrevFeed works →
One email each morning: the day's tech stories, clustered across outlets and summarized. No account needed.
One email a day. Unsubscribe in one click, any time.
Spend a few minutes, get the whole day. Every topic's top stories in one hands-free rundown — listen, watch, or read the transcript.
▶ Play today's briefNew every morning, and the back catalogue is archived by date.
Microbiologists at the University of Rochester modified a $200 Ender 3 FDM 3D printer into a functional 3D bioprinter for engineered living material (ELM) research, costing approximately $450 in total. This development significantly reduces the cost barrier for bioprinting, making ELM research more accessible compared to commercial bioprinters that typically exceed $100,000.